HOURS
Monday-Friday: 7AM-5PM (CST)
If the Dräger Pac 8000 measures hazardous gas concentrations, it sets off an audible, visual and noticeable vibrating alarm. Two bright, flashing LEDs on the top and bottom of the device ensure that the alarm is easily visible from all sides. The acoustic signal reaches a volume of 90 dBa. The display can show the peak concentration measured at any given moment. Earlier alarms registered can also be retrieved at a later time, even if acknowledged.
The Pac 8000 is protected against water, dust and other foreign bodies by a special membrane filter. When the filter becomes heavily soiled in use, it can be quickly replaced. The sensor warranty is 2 years.
Bump tests and calibrations can be carried out especially efficiently in the Dräger X-dock calibration station. The automatic bump tests in the X-dock are a cost-efficient and convenient solution thanks to short test duration and the extremely low test gas consumption. The Pac 8000 is simply placed in the bump test station and automatically initiates the proper testing.
The PAC 8000 has a data and event logger which allows for multiple readings to be taken over a certain period of time.
The PAC 8000 measure from 0-100 ppm with a 1ppm resolution.
Features:
Benefits:
Weight | 1.000000 |
---|---|
Manufacturer | Draeger |
Condition | New |
Warranty | 1 Year |
Sensor Range | 0 - 300 ppm |
Detection Resolution | 1 ppm |
Gas Sensor Type | Ammonia (NH3) |
Width | 5 |
Height | 3 |
Length | 7 |